README for Genome Sequence of Apis mellifera, Amel_4.5 (Feb 4th, 2011) 0. What's New 1. Introduction 2. Conditions for use 3. Description of files 4. Sequence statistics 5. History 0. What's New Amel_4.5 is an improved assembly created by using ABI Solid sequence and Roche 454 paired-end sequence to superscaffold and gap-fill the Amel_4.0 assembly with the Atlas-link software. The contig sequences are formed from the version Amel_4.0 assembly contigs by merging overlapping and redundant sequences between every adjacent pair of contigs in the newly formed scaffolds. This increased the contig N50 from 41kb to 45kb. The contiguity of the scaffolds increased from 362kb to 997 kb with the new data and an additional 5.5% of the sequence is anchored to linkage groups. 1. Introduction This information is for the seventh release (Amel_4.5) of the draft genome sequence of the honey bee Apis mellifera. The assembly data are a set of contigs (contiguous blocks of sequence) and scaffolds. Scaffolds include sequence contigs that can be ordered and oriented with respect to each other as well as isolated contigs that could not be linked (single contig scaffolds or singletons). This is a draft sequence and may contain errors so users should exercise caution. Typical errors in draft genome sequences include misassemblies of repeated sequences, collapses of repeated regions, and unmerged overlaps (e.g. due to polymorphisms) creating artificial duplications. However base accuracy in contigs is usually very high with most errors near the ends of contigs. Additional sequence coverage generated using the ABI SOLiD technology (20x) and Roche 454 technology (~4x) from small insert fragments (~2k) was incorporated into this version (Amel_4.5) of the assembly. The paired-end reads were used for superscaffolding and intra-scaffold gap filling. The assembly contains new scaffolds formed from merging existing scaffolds and scaffolds where some intra-scaffold gaps are filled by other scaffolds or contigs. The newly formed scaffolds are anchored to the same linkage group that their member contigs were anchored to in Amel_4.0 version. There were ten new scaffolds that could be anchored to two different linkage groups and a manual break was inserted to split these scaffolds for consistent anchoring. As a result, the scaffold N50 increased to 997Kb and the sequence anchored to linkage groups increased from 81.3% to 86.8%. The Amel_4.0 release was produced by assembling whole genome shotgun reads with the Atlas genome assembly system at the Baylor College of Medicine Human Genome Sequencing Center. Several WGS libraries, with inserts of 2-4 kb, 4-6 kb, and about 35 kb, were used to produce the data. About 2.7 million reads were assembled, representing about 1.8 Gb of sequence and about 7.5x coverage of the (clonable) honey bee genome. Moderately repetitive sequences were assembled separately and placed using mate pair information and merged with sequence contigs from the version 2.0 assembly into new combined contigs. Highly repeated sequences, low coverage sequences, and contigs with length less than 1 kb and identified haplotype contigs were omitted from this assembly and are available as separate data sets on the FTP site. Reads which did not overlap other sequences were not assembled and are found in the collection of reads called Unassembled Reads. The genome is largely complete. The Amel_4.0 assembly was tested against available honey bee sequence data sets (ESTs, cDNAs, and STS markers) for extent of coverage (completeness). When all sequences (assembled genome contigs and bin0) were tested, over 96% of the sequences in these data sets were found to be represented, indicating that the shotgun libraries used to sequence the genome were comprehensive. About 99% of the STS markers and 98% of the EST sequences and 96% of the cDNAs are represented in the Amel_4.0 assembly. Assuming the ESTs are uniformly distributed throughout the genome, the estimated genome size is 231 Mb/98% = 236 Mb. STS marker sequences and cDNAs give similar estimated genome size. The honey bee genome project generated 1776 Mb of high quality bases, corresponding to 7.5x sequence coverage. The Amel_4.5 and Amel_4.0 assemblies were tested against available expressed sequence data from seven libraries to measure the extent of coverage (completeness). Amel_4.5 showed slightly more complete coverage than V_4.0 (88.7% vs. 88.2%) 2. Conditions for use These data are made available before scientific publication with the following understanding: - The data may be freely downloaded, used in analyses, and repackaged in databases. - Users are free to use the data in scientific papers analyzing particular genes and regions if the providers of this data (Baylor College of Medicine Human Genome Sequencing Center) are properly acknowledged. - The BCM-HGSC plans to publish the initial large-scale analyses of the dataset, including large-scale identification of regions of evolutionary conservation and large-scale genomic assembly. Large-scale refers to regions with size on the order of a chromosome (that is, 30 Mb or more). - Any redistribution of the data should carry this notice. 3. Description of files The files can be found by going to the honey bee section of the BCM-HGSC web site at www.hgsc.bcm.tmc.edu or at ftp://ftp.hgsc.bcm.tmc.edu/pub/data/Amellifera/fasta/. There are 6 directories. I. contigs/ directory This directory has 3 files of assembled contigs, quality and a AGP file describing the positions and orientations of the contigs in the scaffold Amel_4.5.AGP.contig.fa (fasta file) Amel_4.5.AGP.contig.fa.qual (quality file) Amel_4.5.AGP (contig to scaffold AGP file) The Amel_4.5.AGP file describes the order and orientation of the contigs within the scaffolds. It is in standard NCBI AGP format. (http://www.ncbi.nlm.nih.gov/Genbank/WGS.agpformat.html) The orientations of the contigs within an oriented scaffold are determined, which is same as the contig AGP file. II. linearScaffolds/ directory This directory has 3 files Amel_4.5.AGP.linearScaffold.fa (fasta file) Amel_4.5.AGP.linearScaffold.fa (quality file) Amel_4.5.SCAFtoCHROM.AGP (scaffold to chromosome AGP file) The sequences are linearized scaffolds where the gaps between adjacent contigs within a scaffold are filled with 'N's and the captured gap size is estimated from the clone insert size. The Amel_4.5.SCAFtoCHROM.AGP file describes the order and orientation of the contigs within the scaffolds. It is in standard NCBI AGP format. (http://www.ncbi.nlm.nih.gov/Genbank/WGS.agpformat.html) except that there is an extra value for orientation, '0', which means the orientation of this scaffold is unknown because the scaffold contains only one marker which is used to anchor to the corresponding chromosome. III. Unassembled_Reads/ directory This directory has one fasta file, its corresponding quality file and a library insert size table for unassembled or bin0 reads from the Atlas Assembler. The reads which did not overlap with others as detected by Atlas_Overlapper are collectively called bin0 reads. These reads were not assembled. The files are: bin0Reads_20060310.fa.gz (fasta file) bin0Reads_20060310.fa.qual.gz (quality file) lib_insert_size_20060310.tbl (library insert size information) The format of the fasta and quality file: a. If the read sequence is in the NCBI trace archive, the format is: >gnl|ti|TI_number TEMPLATE: template DIRECTION: direction ATTTATGCGCG b. If the read sequence is not in the NCBI trace archive, the format is: >gnl|bcm|Trace_ID TEMPLATE: template DIRECTION: direction ATTTATGCGCG The format of the lib_insert_size_20060310.tbl: Library_Name Average_Insert_Size Standard_Deviation The Library_Name is the first 4 letters of the template. Average_Insert_Size and Standard_Deviation were calculated by the mate pairs assembled into the same contig. IV. Repeat_Reads/ directory This directory has one fasta file, its corresponding quality file and a library insert size table for the repetitive reads. These reads were identified by the reads' overlapping numbers. A read's overlapping number is defined as the number of other reads overlapping with it. The repetitive reads are identified in two ways: a. Those reads with overlapping numbers >1000. b. Those reads which overlap a read whose overlapping number is >1000. The format of the sequences and the library insert size table is the same as above for unassembled reads. V. Small_Omitted_Contigs/ directory This directory has one fasta file and its corresponding quality file. These contigs with length less than 1 kb were omitted from the assembly. VI. haplotype_contig/ directory This directory has one fasta file and its corresponding quality file. These identified haplotype contigs were omitted from the assembly. VII. Convert.ID.txt file This file is a table to convert the old Amel_4.0 Scaffold ID to the new Amel_4.5 Scaffold ID. This table can also be used to find how the old contigs and scaffolds were combined and linked to chromosomes. 4. Sequence statistics Scaffold statistics Scaffolds/Contigs Number N50(kb) Bases+ Bases(Mb) Total/Scaffold Gaps(Mb) Length(%) Anchored Scaffolds 340 1,209 203 200 86.8 Unanchored Scaffolds 5,304 56 31 29 13.2 All Scaffolds 5,644 997 234 229 100 All Contigs 16,501 45 229 229 97.8 Completeness using Illumina RNA-seq from seven libraries matched to the genome assembly using BLAST. library total assembled Amel_4.5 Amel_4.0 transcripts Number Percent Number Percent AB 14,614 13,980 95.6% 13,987 95.7% BrainOvery 27,412 26,341 96% 26,342 96% Embryo 19,616 18,565 94.6% 18,565 94.6% Larvae 18,050 9,061 50.1% 9,041 50% Mixed_antennae 14,891 13,868 93.1% 13,865 93.1% Overy 28,451 27,500 96.6% 26,929 94.6% Testes 10,557 9,234 87.4% 9,060 85.8% Total 133,591 118,549 88.74 117,789 88.17 5. Sanger Read Statistics Clones and reads used in honeybee assembly. InsertSize(kb) 2-4 4-6 35 AT-rich* BAC* Total Source/Vector Plasmid Plasmid Fosmid Plasmid Plasmid Reads (million) All 1.12 1.23 0.11 0.85 3.31 Trim 0.95 1.01 0.08 0.73 0.47 3.23 Paired 0.90 0.95 0.06 0.55 0.21 2.67 Asm 0.87 0.94 0.07 0.62 0.47 2.97 Bin0 0.02 0.02 0.002 0.009 0.04 Bases (million) Trim 589.8 624.7 50.9 510.3 280.3 2056 Asm 544.0 589.3 45.5 432.2 280.3 1891 Bin0 6.3 6.0 0.9 4.2 17.4 Sequence Coverage [1] 2.5x 2.6x 0.2x 2.2x 7.5x Clone Coverage [2] 5.6x 10.4x 5.0x 2.1x 23.1x [1] Sequence coverage was calculated as total trimmed bases divided by calculated genome size. Genome size was calculated as total contig length divided by the fraction of ESTs hit by all contigs(231M/98%=236M). [2] Clone coverage was calculated as sum of insert sizes for paired reads divided by the calculated genome size. * AT-rich read libraries had shorter average insert sizes, from 1200 to 1900 base pairs. 6. History Amel_4.0 (March 10, 2006) ftp://ftp.hgsc.bcm.tmc.edu/pub/data/Amellifera/fasta/Amel20060310-freeze/ This release used an improved genetic map to place the genome sequence on chromosomes. In addition, some assembly errors from previous versions were corrected. The parts of the assembly that contain mapped STS markers were anchored to chromosome using the marker set from Michel Solignac (with 2013 markers). Scaffolds with more than one marker could be oriented (65%) on the chromosome, those with only one marker could be placed but not oriented (14%). Most (79%, 186 Mb) of the genome is placed on chromosomes. Amel_3.0 (May, 2005): (ftp://ftp.hgsc.bcm.tmc.edu/pub/data/Amellifera/fasta/Amel20050501-freeze/) This release is a new assembly of honeybee Apis mellifera genome. Moderately repetitive sequences were assembled separately and placed using mate pair information and merged with sequence contigs from the version 2.0 assembly into new combined contigs. Identified haplotype contigs were omitted from this assembly. Contaminated regions identified in the version 2.0 assembly were omitted from this assembly. This release used the K16 Soliagnac map, with 1634 markers, to anchor parts of the genome to chromosomes. Amel_2.0 (Jan, 2005): (ftp://ftp.hgsc.bcm.tmc.edu/pub/data/Amellifera/fasta/Amel20050120-freeze/) This release is a new assembly of honeybee Apis mellifera genome. It added reads from shotgun sequencing of purified AT rich regions of the genome, Fosmid clones ends and BAC reads to the previous WGS reads. 480k AT rich reads, 470k BAC reads, and 40k Fosmid clone end reads were added to the assembly. Addition of these reads increased both contig and scaffold length, and contributed 17 Mb to the final assembly. This release used the K16 Soliagnac map, with 1634 markers, to anchor parts of the genome to chromosomes. Amel_1.2 (Jul, 2004): (ftp://ftp.hgsc.bcm.tmc.edu/pub/data/Amellifera/fasta/Amel20040720-freeze/) This release is a new assembly of honeybee Apis mellifera genome. It added reads from shotgun sequencing of purified AT rich regions of the genome to the previous WGS reads. Of 171K high quality AT rich reads, 141k were added to the assembly. Addition of these reads increased both the contig and scaffold length, and contributed 10 Mb to the final assembly. This release used the K16 Solignac map, with 1300 markers, to anchor parts of the genome to chromosomes. Amel_1.1 (Jan, 2004): (ftp://ftp.hgsc.bcm.tmc.edu/pub/data/Amellifera/fasta/Amel20040120-freeze/) This release is an incremental change of the honey bee Apis mellifera assembly. It assembled bin0 reads, used more markers, and corrected the problems in some files of the previous release. 1. All of the bin0 reads which clustered into groups of 2 or more reads were assembled and scaffolded with the previous assembly. About 100K bin0 reads were added to the new assembly and about 30K are still in bin0. Most of the previous contigs remain the same except that some contigs were merged due to overlaps between adjacent contigs in the scaffolds. 2. More markers (1050 in this version vs. 854 in Amel_1.0) were used for placing sequences on linkage groups. More sequences were placed on the linkage groups. 3. Corrected the inconsistencies in agp files and sequence files. In Amel_1.0, Group17,18,19,20 and GroupUn have inconsistent sequence names in the agp files and sequence files due to the use of a wrong look up table. Sequence names in sequence files are correct. 4. Corrected mapping problems. In Amel_1.0, Group9 and Group10 were merged into one group and Group4 was separated from Group20 due to a formatting issue in the original linkage map file. 5. In AGP files, unknown orientation is indicated by '0' instead of 'U' as in the previous release. 6. Group numbers were remapped so that they are from 1 to 16. The correspondence is as follows. Amel_1.1 Amel_1.0 ------------------ 1 13 2 12 3 10 4 19 5 14 6 20+4 7 7 8 9 9 15 10 18 11 8 12 6 13 17 14 16 15 5 16 11 Amel_1.0 (Dec, 2003): The first version of the honey bee Apis mellifera assembly was released in December, 2003